VIRATA ADSL Ethernet Router Series, Technical Manual

Page: 15 / 84

○ ○ ○ ○ ○
2 — Basic Commands on Running Local Management
2-2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2.2 Checking Your Router Performances
i) To check for line parameters :
bsp line
ii) To check for line performance :
bsp perf
iii) To check for line status :
bsp mode
iv) To check net data rate :
bsp channel
v) To monitor traffic:
bun list channels
2.3 Checking Your Router Entries
Messages displayed are the settings you have saved.
i)
To list existing interfaces:
ip device
or
bridge device
[for Transparent Bridge and RFC 2684 (RFC 1483) Ethernet Framing]
ii) To list existing subnet mask:
ip subnet
or
ppp 1 lansubnet
(for RFC 2364 and RFC 2516)
iii) To list existing route table (not applicable for Transparent Bridge)
ip route