VIRATA ADSL Ethernet Router Series, Technical Manual

Page: 43 / 84

○ ○ ○ ○ ○
6 — Configuring PPTP (Point-to-Point Tunnelling Protocol)
6-2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6.1.3 Step 3 - Binding to Ethernet Interface
Configure the PPTP process to bind to an Ethernet interface and to setup tunnel 1
to listen (waiting for the PNS to initiate the connection). Assuming that the IP
address given is 192.168.1.1 .
pptp bind 192.168.1.1
pptp 1 create listen
config save
6.2 Setting Up Dial-Up Networking
i) From your Windows desktop, right-click on Network Neighborhood icon and
select Properties .
ii) Click on Add .
iii) Select Adapter and click Add .
iv) From the Manufacturers list, scroll down and select Microsoft .
From the Network Adapters list, select Dial-Up Adapter and click OK .
(DO NOT remove the existing Dial-Up Adapter from the network component
list.)
You should see
Dial-Up Adapter #2 (VPN Support) listed in the components
list as shown.
v) Repeat step(ii) and step(iii) .
From the Manufacturers list, scroll down and select Microsoft .
From the Network Adapters list, select Microsoft Virtual Private Networking
Adapter and click OK .