2-1
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
•
Type
help
to display on-line help on the console commands.
•
Type
home
to return to the initial command prompt.
•
Type
.
to repeat previous command.
•
Press
ñ
key on your keyboard to display previous command line
entered.
•
Type
logout
to logout. (You will be prompted for login again.)
•
Console commands are
case-sensitive
.
Punctuations
(e.g. '
_
' underscore,
'
-
' hyphen, ' ' spacing, etc) must be adhered to strictly.
•
For detailed description and syntax of console commands, you may refer
to
Appendix A
-
Commonly Used Commands
on this Technical Manual.
2.
Basic Commands on Running Local
Management
This section gives you the basic guidelines on console commands, how to check your
router performances, router entries, to disconnect/connect your ADSL link and to
toggle between modes.
2.1
Guidelines
The commands in this manual are to be issued at initial command
prompt. You may also choose to go to the respective directories and
run the commands from there. (For example, to run bsp commands,
you need only to type
channel
at
bsp>
prompt to obtain the net data
rate.)
At the prompt for password, enter either 'stm' or 'password'
(without the quotes). These are factory default passwords.
(If you have changed the default password at the DSL Router
Commander - SNMP option, enter your new password.)
