![background image](http://html1.mh-extra.com/html/vinpower/robotic-autoloader-3-5/robotic-autoloader-3-5_user-manual_1028397047.webp)
Page 43
Duplicator 2.00
15. AUTOCOPY
Counter:
No Counter
Preparing...
Please Wait
OK: 0 NG: 0 NB: 0
Input Bin > Drive01
Processing...
Please Wait
OK: 0 NG: 0 NB: 0
Input Bin > Drive02
15. AUTOCOPY
The AUTOCOPY function is the simplest way to make CD/DVD/Blu-Ray Disc copies. It simplifies the copy
process by not requiring that the project be pre-loaded on the hard drive. Simply place the master disc on
top of the first Input Spindle and it will be loaded onto a reserve partition in the HDD. The data is transferred
automatically to all of the blank discs which follow it. To make copies in AUTOCOPY mode, you simply:
Fill the input spindle(s) with the required number of blank discs
Place the Master disc on top of the stack in the first input spindle
Execute the
AUTOCOPY
function
Fill the input spindle(s) with blank discs. Place the Master disc on top of the
stack of blank discs on the first input spindle, and press the
ENT/Enter
button. You will then see the
Counter Selection
menu.
Follow the instructions shown
in “Setting Counters” on page 15 to continue.
Once the counter has been set, press the
ENT/Enter
button to confirm. You
will then see the
Preparing
screen:
After a short interval, the robotic loader will pick the top disc (the Maser Disc)
from the input spindle and place it into one of the drives. As this is
happening, you will see a screen similar to below:
This information screen shows what is happening. In this case, the loader
has taken a disc from the input spindle and is placing it into Drive 1.
The loader will perform the loading process which will transfer the content of your master disc into the
reserved partition of the hard drive.
Upon the successful loading process, the system will drop the Master Disc
onto the output spindle. It will then pick up the blank discs from the input
spindle and place those into drives until either all of the drives are full, or the
count that you loaded into the counter is reached.
It takes a few seconds for the autoloader to recognize all the discs.
After two or three seconds of processing time, one of the following
Copy Progress
screens will appear.
Counter Specified
No Counter Specified
Copying... H4012MB
0/21 12% 481MB
or:
Copying... H4012MB
0 12% 481MB
“H” indicates the source of the job
resides in the Hard Drive.
“4012MB” indicates the capacity of
the master disc.
“12%”/”481MB”
indicates
the
current progress of the duplication.
“0/21” indicates you have a project
size of 21 copies and you have
made 0 copies so far.
“H” indicates the source of the job
resides in the Hard Drive.
“4012MB” indicates the capacity
of the master disc.
“12%”/”481MB” indicates the
current
progress
of
the
duplication.
“0” indicates you have made 0
copies so far.
Note:
It is normal to see the progress indicator stay at 0%-10% and 100% for approximately 30
seconds for CD duplication and up to one minute for DVD/Blu-Ray Disc duplication. That is caused
by the initializing and finalizing stages.
Summary of Contents for ROBOTIC AUTOLOADER 3.5
Page 1: ...User s Manual v3 5...