Page 9
4. Menu Overview
This section provides an overview of the menu options. These menu options are explained in detail on the
referenced pages.
1. Copy
page 17
Use the
Copy
menu or
Copy
quick key to make CD/DVD/Blu-Ray Disc (Optional) copies. Before
you start a copy process, make sure you have selected the correct Master Mode. Please refer to
“Single Master and Multi Master Modes” on page 14 for additional information.
If you plan to use Single Master Mode, please make sure you have successfully loaded your master
disc to a partition on the Hard Drive.
If you plan to use Multi Master Mode, please make sure you have placed every master disc on top
of the corresponding number of blank discs.
For additional information on copying on either Master Mode
, see “Making Copies in Single Master
Mode” on page 17 or “Making Copies in Multi Master Mode” on page 19.
2. Test
page 22
Use the
Test
menu or
Test
quick key to simulate the copy process. With simulation, write once
recordable discs such as DVD-R, or CDR will be reusable. The purpose of simulation is to ensure
error free duplication.
Note:
Due to physical limitations of the BD-R/DVD+R recordable format, if you try to simulate
BD-R/DVD+R copying, you will encounter failure messages.
Warning
: If you are using CD/DVD/BD Rewritable discs as your blank media during the simulation,
the content on those discs will be permanently erased.
3. Compare
page 22
Use the Compare function to perform a bit-by-bit comparison between the content of your master
disc(s) in the Hard Drive and the contents of all discs it copied. This ensures that all of your copies
are identical to original master disc(s).
Note:
The bit-by-bit comparison will only apply on all Blu-Ray Discs, DVDs and Data CDs. A
readability check will be applied for other formats like Audio CDs, CD+G, and Video CDs
discs due to their lack of error correction mechanisms.
4. Test + Copy
page 23
Use the
Test + Copy
menu option to simulate the copying process initially. Then, the autoloader
performs the actual copy process on the blank disc(s) that passed the simulation. For the blank
disc(s) that didn’t pass the simulation, the autoloader will place it/them to the Reject Area.
5. Copy + Compare
page 23
Use the
Copy + Compare
menu option to make 100% reliable copies. After the copy process is
done, the autoloader automatically compares the copies from the content of your original master
disc. Any copied discs that fail the compare process will be placed in the Reject Area.
6. Select Burn Speed
page 24
Use the
Select Burn Speed
menu option or the
Speed
quick key to adjust the duplication speed for
the various blank disc formats.
7. Select Source
page 25
Use the
Select Source
menu or the
Source
quick key to tell the system where the content of the
master disc resides during duplication. At this point, Hard Drive is the only option in this setting
since it is the only place where the content of the master disc resides during duplication.
Summary of Contents for ROBOTIC AUTOLOADER 3.5
Page 1: ...User s Manual v3 5...