Page 11
7. Screen Saver
Use this setting to enable or disable the
Screen Saver
feature. When this is enabled, a
screen saver is displayed whenever your autoloader has been idle for a set period of time.
8. Counter
Use the Counter menu to enable or disable the
Counter
feature. The counter tells you how
many discs have copied and how many discs are left to go during the duplication process
stopping the job once the desired number of copies has been made.
9. DVD+R Compatibility Mode
This feature allows you to turn the
DVD+R High Compatibility Mode
feature ON or OFF.
The purpose of this feature is to increase the compatibility of DVD+R media with a broader
range of DVD Video players.
10. ISRC
This option will allow you to enable/disable copying the ISRC code of an Audio CD. ISRC is
the serial number of the audio track that uniquely identifies the song in that audio track.
This ISRC code is commonly found in commercial Audio CDs and rarely seen on home
made Audio CDs. By enabling this feature, the duplication performance will be lowered.
11. Disable Drives
Use this utility to allow the system to disable certain drives/trays when certain drives/trays
are producing high failure rates.
12. Overburn
Overburn is a burning method to bypass the capacity limitations of the media to burn further
out onto the edge of the media. This can result in slightly higher storage capacity; however,
it has also been known to have compatibility playback issues. Please use it with caution.
Note:
This works only for CD and BD media. Due to physical limitations of the DVD
media, it is not possible to record more than the advertised capacity.
13. Max Failure per Job
Use this setting to set the maximum number of failures the autoloader is allowed per job.
Once the maximum is reached, the job will be stopped.
14. Max Failure per Drive
Use this setting to set the maximum number of failures each drive is allowed during the job.
Once the maximum is reached for any particular drive, said drive will be disabled for the
remainder of the job. The autoloader will continue to function using the remaining drives.
12. System Utilities
page 34
1. Disc Info
Use the Disc Info utility to identify the type and other information about your blank
recordable media.
2. System Info
The System Info menu provides important hardware information such as firmware versions,
Duplication/Robot Control Boards types, etc
3. Device Info
This menu allows you to see information about the recording devices built inside your
autoloader.
4. Load Default
Use this menu option to reset all of the options back to the manufacturer's default values.
You can use this function if your autoloader is acting abnormally.
Summary of Contents for ROBOTIC AUTOLOADER 3.5
Page 1: ...User s Manual v3 5...
