![background image](http://html1.mh-extra.com/html/vinpower/robotic-autoloader-3-5/robotic-autoloader-3-5_user-manual_1028397038.webp)
Page 34
System Utilities
1. Disc Info
Disc Info
Please Insert Disc
Disc Info
3 Disc Detected, GO?
Setup
14. Max Failure per Drive
Max Failure per Job
[030] OK?
11.14 Max Failure per Drive
Use this setting to set the maximum failures each drive is allowed per job. Once the maximum is reached for
any particular drive, such drive will be disabled for the remainder of the job. The default value for this setting
is 5.
Use the
Up or
Down
button to select the 14.
Max Failure per
Drive
menu and press the
ENT/Enter
button to enter that menu.
You can select numbers between 1 to 999 by pressing the
Up or
Down
button:
To specify the number of maximum failures per job, you need to
enter/input a three-digit number.
If you need to specify a number that is less than three digits, fill the leading spaces with zeros (any leading
zeros will be skipped). Examples of three-
digit numbers are “034” (thirty four), or “010” (ten).
To enter the number, you need to use the
Up or
Down button
to select the number for each digit and
use the
ENT/Enter
button or the
ESC/Escape
button to move the cursor position right or left. Once you've
finished, move the cursor to “OK” and press the
ENT/Enter
button. For example, if you want to specify a
counter value of 21 (twenty one). The three-
digit value would be “021.” To input the desired quantity, do the
following:
Make sure the cursor is located at the first position (First blinking position):
Press the
Down
button repeated
ly until “0” is displayed.
Press
ENT/Enter
button once to move the cursor to the next position.
Press the
Down
button repeatedly until “2” is displayed.
Press
ENT/Enter
button once to move the cursor to the next position.
Press the
Down
button repeat
edly until “1” is displayed.
Now, “021” is displayed, press
ENT/Enter
button once and the cursor moves to “OK”.
Then, press the
ENT/Enter
button once to submit your maximum failures per job.
12. System Utilities
System Utilities is used to provide useful tools for duplication aspect of the system. Each of these options is
discussed in its own subsection.
12.1 Disc Info
Use the Disc Info utility to identify the type and other information about your blank recordable media.
.
Note:
The Disc Info function does not use the robotic capabilities of the system. You must manually
insert the discs into the drives.
Use the
Up or
Down
button to select the
Disc Info
menu and press the
ENT/Enter
button to enter that menu. The system will proceed to the
Please
Insert Disc
menu.
Place your disc(s) into the drives.
After a few seconds, the system will detect the discs and ask you if you want
to proceed. Wait until all of the discs have been detected and press the
ENT/Enter
button to continue.
Summary of Contents for ROBOTIC AUTOLOADER 3.5
Page 1: ...User s Manual v3 5...