![background image](http://html1.mh-extra.com/html/vinpower/robotic-autoloader-3-5/robotic-autoloader-3-5_user-manual_1028397033.webp)
Page 29
Hard Drive Setup
7. Format Hard Drive
All Stored Data will be erased.
Press OK to Continue
Setup
1. Language
Language:
English
Language:
Espanol
Setup
2. Read Error Skip
Read Error Skip
On
Read Error Skip
Off
Read Error Skip
Off with Retry
10.7 Format Hard Drive
This function formats the Hard Drive. It deletes all partitions and re-initiates the Hard Drive. To format the
Hard Drive, use the
Up or
Down
button to navigate to the
7. Format Hard Drive
menu:
Press the
ENT/Enter
button to enter the
Format Hard Drive
menu.
Press the
ENT/Enter
button to format the Hard Drive. After
the Hard Drive has been formatted, the system will return
you to the
Format Hard Drive
menu.
11. Setup
The 11.Setup menu options are used to configure various options on the autoloader. Each of these options
is discussed in its own subsection.
11.1 Language
This setting allows you to choose the language that you prefer to use when navigating the autoloader. The
autoloader supports multiple languages.
Use the
Up or
Down
button to select the Language menu and press
the
ENT/Enter
button to enter that menu.
Use the
Up or
Down
button to select between the languages and
press the
ENT/Enter
button to select that option.
11.2 Read Error Skip
Normally, when the autoloader encounters a read error while reading your master disc, the duplication is
aborted and all the recordable media in the writers are ruined. However, if you believe that your master disc
has a small, insignificant error due to physical damage, you can enable this setting to allow the autoloader
to skip any read errors it encounters.
Note:
This function does not fix the error; it only skips it to make the rest of the data readable.
Use the
Up or
Down
button to select the
Read Error Skip
menu and
press the
ENT/Enter
button to enter that menu.
Use the
Up or
Down
button to select whether
Read Error Skip
is On,
Off or Off with Retry and press the
ENT/Enter
button to select that option.
On:
By select this setting, you instruct the system to skip any
Read Errors during the duplication process.
Off:
By select this setting, you instruct the system to fail the
entire duplication process when a Read Error occurs.
Off with Retry: By select this setting, you instruct the system to
perform additional retries when a Read Error occurs,
however, upon retry attempt failed, the entire duplication
process will be failed.
Summary of Contents for ROBOTIC AUTOLOADER 3.5
Page 1: ...User s Manual v3 5...