Vinpower ROBOTIC AUTOLOADER 3.5, User Manual

Page: 32 / 53

Page 28
Hard Drive Setup
4. Delete Partition
Choose Partition
[FUN.VEF] 4012MB
Delete Partition
[FUN.VEF], OK?
[FUN.VEF]
Deleted!
Hard Drive Setup
5. Partition Info
Hard Drive Setup
6. Select Loading Drive
Drive 1 Port 0
PIONEER DVD-RW DVR-115D
10.4 Delete Partition
The Delete Partition option deletes an existing partition. Use the Up or Down button to navigate to the
4.Delete Partition menu.
Press the
ENT/Enter button to enter the Delete Partition menu. The
autoloader will first ask you to choose the partition to be deleted:
Use the
Up or Down button to find the partition that you want to delete.
Press the ENT/Enter button to select the partition.
The autoloader displays the
Delete Partition confirmation message. Press
the ENT/Enter button to continue.
The autoloader displays the
Deleted message for two seconds and then
returns you to the Delete Partition menu.
10.5 Partition Info
The Partition Info option provides information about an existing partition. Use the Up or Down button
to navigate to the 5. Partition Info menu.
Press the
ENT/Enter button to enter the Partition Info menu, and use the
Up or Down button to find the partition that you want information
about.
 The “(002)” field indicates that it is the second partition on the drive.
 The “[FUN.VEF]” field shows the name of the partition.
 The “DVD” field indicates that the master stored in this partition is a
DVD.
 The “4021MB” field indicates the capacity of the master’s content
stored in this partition.
(002) DVD 4012MB
FUN.VEF
10.6 Select Loading Drive
Select Loading Drive gives you the control of choosing which drive the master should be loaded from when
you perform the
“Load Partition” feature under “Hard Drive Setup”.
Please note that this setting does NOT apply to
any feature other than settings within “Hard Drive Setup”.
To change the loading drive, use the
Up or Down button to navigate to the 6. Select Loading Drive
menu:
Press the
ENT/Enter button to enter the Select Loading Drive menu.
Press the
Up or Down button to select the desired Drive. Press
the ENT/Enter button to select the Loading Drive.
The selected drive will now be used to load a partition to the Hard Drive.