Termoscanner
43
EN
Notes on Safety
- Please use the specified power supply to connect.
- Do not attempt to disassemble the device; in order to prevent electric shock, do not remove screws or covers.
- There are no user-serviceable parts inside. Please contact the nearest service center as soon as possible if there is any failure.
- Avoid from incorrect operation, shock vibration, heavy pressing which can cause damage to product.
- Do not use corrosive detergent to clean main body of the device. If necessary, please use soft dry cloth to wipe dirt; for hard contamination, use neutral
detergent. Any cleanser for high grade furniture is applicable.
- Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this may damage the image sensor.
- Please follow the instructions to install the device. Do not reverse the camera, or the reversing image will be received.
- Do not operate it incase temperature, humidity and power supply are beyond the limited stipulations.
- Keep away from heat sources such as radiators, heat registers, stove, etc.
- Do not expose the product to the direct airflow from an air conditioner.
- This is product instructions not quality warranty. We may reserve the rights of amending the typographical errors, inconsistencies with the latest ver-
sion, software upgrades and product improvements, interpretation and modification. These changes will be published in the latest version without
special notification.
- When this product is in use, the relevant contents of Microsoft, Apple and Google will be involved in. The pictures and screenshots in this manual are
only used to explain the usage of our product. The ownerships of trademarks, logos and other intellectual properties related to Microsoft, Apple and
Google belong to the above-mentioned companies.
- All pictures and examples used in the manual are for reference only.
1 - Introduction
This Termoscanner is a device for the rapid detection of human body temperature that allows to detect any anomalies in safety conditions for subjects in
charge of the control. The results obtained with the measurements are reliable with an accuracy of ± 0,3 °C.
1.1- Login from Touch screen
After the device is powered on and connected to the LAN, you will see the following interface.
Tap the "Menu" button to pop up a login box. Enter the username and password and tap “OK” to enter the main menu page as shown below.
Default username: admin
Default password: 123456
