Termoscanner
47
EN
3 - Go to the router’s management interface through IE browser to forward the IP address and port of the
device
in the “Virtual Server”.
Router Setup
4 - Open the IE browser and input its WAN IP and http port to access.
►
Access through PPPoE dial-up
Network connection
You may access the
device
through PPPoE auto dial-up. The setting steps are as follow:
1 - Go to Config
Network
Port menu to set the port number.
2 - Go to Config
Network
TCP/IPv4
PPPoE Config menu. Check “Enable” and then input the user name and password which you can
get from your internet service provider.
3 - Go to Config
Network
DDNS menu. Before you configure the DDNS, please apply for a domain name first. Please refer to DDNS
Configuration for detail information.
4 - Open the IE browser and input the domain name and http port to access.
►
Access through static IP
Network connection
The setting steps are as follow:
1 - Go to Config
Network Config
Port menu to set the port number.
2 - Go to Config
Network Config
IP Address menu to set the IP address. Check “Use the following IP address” and then input the static IP
address and other parameters.
3 - Open the IE browser and input its WAN IP and http port to access.
