Termoscanner
70
EN
6.4.5 - RTSP
Go to Config
Network
RTSP.
Select “Enable” to enable the RTSP function.
Port
: Access port of the streaming media. The default number is 554.
RTSP Address
: The RTSP address (unicast) format that can be used to play the stream in a media player.
Multicast Address
Main stream
: The address format is “rtsp://IP address: rtsp port/profile1?transportmode=mcast”.
Sub stream
: The address format is “rtsp://IP address: rtsp port/profile2?transportmode=mcast”.
Third stream
: The address format is “rtsp://IP address: rtsp port/profile3?transportmode=mcast”.
Audio
: Having entered the main/sub stream in a VLC player, the video and audio will play automatically.
If “Allow anonymous login…” is checked, there is no need to enter the username and password to view the video.
If “auto start” is enabled, the multicast received data should be added into a VLC player to play the video.
Note:
1 - This camera support local play through a VLC player. Enter the RTSP address (unicast or multicast, eg. rtsp://192.168.226.201:554/
profile1?transportmode=mcast) in a VLC player to realize the simultaneous play with the web client.
2 - The IP address mentioned above cannot be the address of IPv6.
3 - Avoid the use of the same multicast address in the same local network.
4 - When playing the video through the multicast streams in a VLC player, please pay attention to the mode of the VLC player. If it is set to TCP mode,
the video cannot be played.
5 - If the coding format of the video of the main stream is MJPEG, the video may be disordered at some resolutions.
6.4.6 - UPnP
If you enable this function, you can quickly access the device via LAN and you don’t need to configure the port mapping when the device is connected to
the WAN via the router.
Go to Config
Network
UPnP:
Select “Enable UPNP” and then input friendly name.
After you enable it and set the UPnP name, you will see the UPnP name by clicking “Network” on the desktop of your computer which is in the same local
area network. Then double click this name to access the device quickly.
