Termoscanner
44
EN
3 - Modify the IP address. The default IP address of this device is 192.168.226.201. Click the device listed in the above table to show the network informa
-
tion on the right hand. Modify the IP address and gateway and make sure its network address is in the same local network segment as the computer’s.
Please modify the IP address of your device according to the practical situation.
For example, the IP address of your computer is 192.168.1.4. So the IP address of the device shall be changed to 192.168.1.X. After modification, please
input the password of the administrator and click “Modify” button to modify the setting.
4 - Double click the IP address and then the system will pop up the IE browser to connect the device. IE browser will auto download the Active X control.
After downloading, a login window will pop up as shown below.
The default username is “admin”; the default password is “123456”.
►
2 - IE Remote Access
You may connect the device via LAN or WAN. Here only take IE browser (6.0) for example. The details are as follows:
2.1 - LAN
In LAN, there are two ways to access device:
1 - access through IP-Tool;
2 - directly access through IE browser.
2.1.1 - Access through IP-Tool
Network connection:
1 - Make sure the PC and the device are connected to the LAN and the IP-Tool is installed in the PC from the CD.
2 - Double click the IP-Tool icon on the desktop to run this software as shown below:
