Termoscanner
51
EN
1 - Enable “Mask Detection”as needed.
2 - Set the alarm holding time. Set the alarm trigger options.
Alarm Out
: If enabled, alarm output will be triggered when the detected person doesnt wear a mask.
Trigger Audio Alarm
: If enabled, the alarm voice will be heard when the detected person doesn’t wear a mask.
The setup steps of other alarm trigger options are the same astemperature measurement settings. Please refer to temperature measurement settings
chapter for details.
4 - Live View
4.1 - Temperature Measurement& Face Recognition View
4.1.1
-
Temperature Measurement Requirements
For accuracy temperature measurement, here are some recommendations.
1) The face image of the detected person shall be within the pre-defined face detection area. His/her forehead shall be in the middle of the “Temp
zone”(make the green plus stay in the middle of the Temp zone). The detected face shall be 30cm~40cm away from the temperature measurement sen
-
sor.
2) Please remove the hat/cap/helmet/hair covering the forehead for accuracy temperature measurement.
