Villager VBV 230 E, Instruction Manual, Page: 26 / 160

7
Villager VBV 230 E (GB)
Arrowhead on the
valute case
Arrowhead on the
blower nozzle pipe
Fig 3
Fig 4
Fig 5
ASSEMBLING THE BLOWER
1. With the air vent closed, push the straight nozzle pipe over the discharge port
and locking pin, the arrowhead on the straight nozzle pipe should be on the same
line with the volute case. Rotate the pipe clockwise to lock. Then tighten the screw
in place to secure (Fig.3).
2. Tighten the screw in place to secure
(Fig.4).
3. Push the blower nozzle pipe over the
straight nozzle pipe and locking pin. Rotate
the pipe clockwise to lock. The side of the
blower nozzle pipe that says
“
THIS SIDE
UP
”
must face upwards. Then tighten the
screw in place to secure (Fig.5).