Page | 78
16.1 STP Port
Settings
This web page provides an interface for the administrator to set the
STP/RSTP port configuration.
Field
Description
Port No.
To configure the parameters of RSTP/STP port, the
administrator should select a physical port number,
assign a priory number, enter the RPC and then
press “Submit” button.
Priority (0~240)
Priority field defines the priority of the RSTP/STP
port. The lower the number is, the higher possibility it
will become a root port. There is a default value for
each port.
RFC
(0~200000000)
RPC stands for “Root Path Cost”. The higher the
cost is, the lower possibility it become a root path. In
the general case, the physical port with the higher
bandwidth will be assigned a lower cost.
Summary of Contents for MaxiiNet Vi32226
