Page | 34
Subnet Mask: Enter a valid range. For example: 255.255.255.0
Gateway:
will be used for class C IP Addresses.
Enter the network gateway IP address.
IP Configure: Select Static or DHCP. Select will operate based on the
above entries. If DHCP, the switch must be connected to
server that will provide an address. In many cases you will
not be able to know the IP address from the switch itself.
9.3 System Status
MAC Address: This is fixed and reflects the unique product address
Number of Ports: If the sequence is three numbers:
The first number = number of extended ports
The second number = number of standard ports
The third number = number of uplink ports
Comment:
The operator can enter a unique name from the switch.
Letters and numbers are restricted as follows “a-z”, “A-Z,
“_”, “+”, “-“ and “0-9”
System Version: Is fixed and displays the current firmware version
Enter Idle Time: Enter a value 1-30 = 1to 30 minutes. This is the time a
user can stay connected to the switch without any activity.
After that time a new log in will be required. Note: This
function is only active if the Idle time security button is
selected.
Activity Idle Time Security: Click the radio button to activate the IdleTime
Security function.
Summary of Contents for MaxiiNet Vi32226
