Page | 60
Delete a VLAN: Select a VLAN from the Select button and press Delete to
remove it.
To add a group: Select more than one port.
Modify a VLAN: Select a VID that you want to modify from the Select drop
down. Once the web page is displayed make your modifications and
press the “Update” button.
Step 1:
Select/De-select the VLAN ID.
Step 2:
Select/De-select VID source corresponding to this VID.
Step 3:
Press “Update”.
NOTE:
The CPU control entry cannot be removed.
12.3 Multi to 1
Setting
Multi-to-1 VLAN is used in CPE side of Ethernet-to-the-Home and is
exclusive to VLAN setting on ”VLAN member setting“. In the other words,
once multi-to-1 is set, the previous VLAN setting will be overridden.
The “disable port” means the port which will be excluded in this setting.
All ports excluded in this setting are treated as the same VLAN group.
In the following example, port 3, port 4, port 6, port 7, port 8 and port 9
are excluded in this VLAN Furthermore these ports are treated as the
member of other VLAN. All ports which are not specified in this table only
communicate with port 1.
Summary of Contents for MaxiiNet Vi32226
