Vigitron MaxiiNet Vi32226, Operational Manual

Page: 54 / 114

Page | 54
Low Bandwidth
for TX
High bandwidth
for TX
Low Bandwidth
for RX
High Bandwidth
for RX
This allows the setting of the bandwidth for each port. The Tx rate and Rx
rate can be filled with the number ranging from 1 to 255. This number
should be multiplied by the selected bandwidth resolution to get the
actual bandwidth.
In the “Low” mode, the Tx/Rx bandwidth resolution is 32Kbps for port 1~
port 26. In the “High” mode, the Tx/Rx bandwidth resolution is 256Kbps
for port 1 ~ port 24, and 2048Kbps for port 25, port 26.
Example 1: The TX number of the port1~4 is set to 10, 20, 30, 40
respectively, and Speed base is set to “Low”. The real bandwidth comes
from the formula of 32Kbps*10, 32Kbps*20, 32Kbps*30 and 32Kbps*40
respectively. After the “Update” button is executed, the real bandwidth will
show up in TX fields.
Example 2: The TX number of the port1~4 is set to 10, 20, 30, 40
respectively, and Speed base is set to “High”. The real bandwidth comes
from the formula of 256Kbps*10, 256Kbps*20, 256Kbps*30 and
256Kbps*40 respectively. After the “Update” button is executed, the real
bandwidth will show up in TX fields.
Example 3: The RX bandwidth number of the port 5~ port 8 is set to 50,
60, 70, 80 respectively, and Speed base is set to “Low”. The real
bandwidth comes from the formula of 32Kbps*50, 32Kbps*60, 32Kbps*70
and 32Kbps*80 respectively. After the “Update” button is executed, the
real bandwidth will show up in RX fields.
Example 4: The RX bandwidth number of the port 5~ port 8 is set to 50,
60, 70, 80 respectively, and Speed base is set to “High”. The real
bandwidth comes from the formula of 256Kbps*50, 256Kbps*60,
256Kbps*70 and 256Kbps*80 respectively. After the “Update” button is
executed, the real bandwidth will show up in RX fields.