Vigitron MaxiiNet Vi30018, Operational Manual

Page: 6 / 122

Page | 6
NOTE: The switch is indoor device. If it will be used in an
outdoor environment or connects with some outdoor device,
then it must use a lightning arrester to protect the switch.
WARNING:

Self-demolition on product is strictly prohibited. Damage
caused by self-demolition will be charged for repairing fees.

Do not place product at outdoor or sandstorm.

Before installation, please make sure input power supply
and product specifications are compatible to each other.

To reduce the risk of electric shock, disconnect all AC or DC
power cord and RPS cables to completely remove power
from the unit.

Before importing/exporting configuration, please make sure
the firmware version is always the same.

After firmware upgrade, the switch will remove the
configuration automatically to latest firmware version.
CAUTION: Circuit devices are sensitive to static electricity,
which can damage their delicate electronics. Dry weather
conditions or walking across a carpeted floor may cause you
to acquire a static electrical charge.
To protect your device, always:

Touch the metal chassis of your computer to ground the
static electrical charge before you pick up the circuit device.

Pick up the device by holding it on the left and right edges
only.

If you need using outdoor device connect to this device with
cable, then you need to add an arrester on the cable
between outdoor device and this device.
Fig. Addition arrester between outdoor device and this
switch