Vigitron MaxiiNet Vi30018, Operational Manual

Page: 31 / 122

Page | 31
Section 8: Operation of Web-Based Management
8.0 Initial
Configuration
This chapter instructs you on how to configure and manage the Vi30018
through the web user interface. With this facility, you can easily access
and monitor through any one port of the switch and all the status of the
switch, including MIBs status, each port activity, Spanning tree status,
port aggregation status, multicast traffic, VLAN and priority status, even
illegal access record and so on.
The default values of the Vi30018 are listed in the table below:
IP Address 192.168.1.133
Subnet Mask
255.255.255.0
Default Gateway 192.168.1.254
Username admin
Password system
NOTE:
In models where the firmware version ends in 1.03, the
switch will default to an IP address of 192.168.1.1.
After the Vi30018 configuration has been finished, you can browse the
interface. For instance, if you type
http://192.168.1.133 in the address
row in a browser, it will show the following screen and will ask you to
input in the username and password in order to login and access
authentication.
The default username is
“admin”
and password is
“system”
. For first
time use, please enter the default username and password, and then
click the
<Update> button. The login process now is completed. In this
login menu, you have to input the complete username and password
respectively, the Vi30018 will not give you a shortcut to username
automatically. This looks inconvenient,
but it’s the safer option.