Vigitron MaxiiNet Vi30018, Operational Manual

Page: 33 / 122

Page | 33
Section 9: Administration
9.0 Prior to
Logging On
Note the default address for the switch is 192.168.1.133. To access the
switch for programming your computer must be on the same subnet using
any final value greater than 1.
NOTE:
The default address for the switch is 192.168.1.133. To
access the switch for programming, your computer must be on
the same subnet using any final value greater than 1.
9.1 Logging On

Enter the correct administrator name and password after the login
page shows up.

Default IP address: 192.168.1.133

Default administrator name: admin

Default password: system

Press “OK” to login.
NOTE:
the administrator name and password fields are case-
sensitive. The higher case characters will be recognized as
different characters. For example: “ADMIN” will be recognized
as the different character from “admin”.
If you input the incorrect administrator name or password, the following
warning m
essage will show up and you must click “OK” to go back to the
login page.