Vigitron MaxiiNet Vi30018, Operational Manual

Page: 101 / 122

Page | 101
Section 20: Log Out
20.0 Log Out
Procedure
Select: Accept to logout
Back: Returns to the previous page
Hardware Based Loading Default settings: The purpose of this function is
to provide a method for the network administrator to restore all
configurations to the default value.
(a) To activate this function, the administrator should follow the
following proced
ures. Press the “Load Default” button for 3
seconds until you see the LoadDefault LED blinking.
(b) When LED starts blinking, it means the CPU is executing the
“load default” procedure. You can release the button now.
After completing this procedure, all the factory default value will be
restored. This includes the IP address, the administrator name, the
password and all switch configurations.
In models where the firmware version ends in 1.03, the switch will default
to an IP address of 192.168.1.1.