Vigitron MaxiiNet Vi30018, Operational Manual

Page: 49 / 122

Page | 49
WARNING:
Power Loss and SecurPort™ Active
If SecurPort™ is active for any port and a power loss occurs,
when power is restored the switch will remember the setting
and deactivate the port. This is to maintain the security of the
port and prevent it from being defeated by a power loss.
In order to restore the connection, the administrator must log on
to the switch and manually enable the port. The Switch
will check to see that any ports with SecurPort enabled, are
linked. If there is no link, the port will be disabled. IP cameras
and some other devices go through an initialization process
when first powered. During this process the devices will not
immediately link up. Since the Switch cannot link to the device
during initialization, the port will be disabled.
To re-enable the transmit/receive ability for a secured port, the user will
need to log into the switch GUI and re-enable it from the “Port
Configuration” page.
Auto-Negotiation:

Enable: Speed will be Auto Negotiate based on the input

Disable: Speed will set by the manual setting
NOTE:
If Auto Negotiation is selected, Speed Selection will not
be active.