Vigitron MaxiiNet Vi30018, Operational Manual

Page: 21 / 122

Page | 21
4.2 Ports and
System Status
LEDs
The Vi30018 includes a display panel for system and port indications that
simplify installation and network troubleshooting. The LEDs are located
on left hand side of the front panel for easy viewing. Details are shown
below and described in the following tables.
LED Conditions Status
TP (Link/ACT) Yellow Green when the TP link is good.
Blinks when any traffic is present.
PoE Port 1-16 Green Green when the port is delivering PoE
power.
Port 17 & 18 Green On is for 1G Link.
Slow blink is for 100Mb/s.
Off with link yellow LED on is for
10Mb/s.
SFP (Link/ACT) Yellow/
Green
Yellow is for activity.
Green is for link.
Blinks when any traffic is present.
Table 2: Port Status LEDs
SYSTEM LED Condition Status
Power Green Lit when powered.
Table 4: System Status LED
4.3 Console Port
The console port can be used for direct communications with the switch.
If the switch's IP address is lost, it can be recovered without having to
reset the switch to its default settings.
Accessing the console port requires running a terminal program on your
computer.
Terminal set up:
Baud Rate 19,200
Bit Setting 8 Bit
Parity
No Parity
Stop Bit 1 Stop Bit
Flow Control No Flow Control (No Hardware)
Log In
Requires User Name and Password
Once log in has been achieved type: help (lower case) for a list of
accessible functions. The current IP can be displayed along with other
functions that can be changed if required.