Vigitron MaxiiNet Vi30018, Operational Manual

Page: 55 / 122

Page | 55
This setting allows the setting of the bandwidth for each port. The Tx rate
and Rx rate can be filled with the number ranging from 1 to 255. This
number should be multiplied by the selected bandwidth resolution to get
the actual bandwidth.
In the “Low” mode, the Tx/Rx bandwidth resolution is 32Kbps for port 1~
port 18
. In the “High” mode, the Tx/Rx bandwidth resolution is 256Kbps
for port 1 ~ port 16, and 2048Kbps for port 17-18.
Low Bandwidth
for TX
Example 1: The TX number of the port1~4 is set to 10, 20, 30, 40
respectively, and Speed base is set to “Low”. The real bandwidth comes
from the formula of 32Kbps*10, 32Kbps*20, 32Kbps*30 and 32Kbps*40
respectively. After the “Update” button is executed, the real bandwidth will
show up in TX fields.
High bandwidth
for TX
Example 2: The TX number of the port1~4 is set to 10, 20, 30, 40
respectively, and Speed base is set to “High”. The real bandwidth comes
from the formula of 256Kbps*10, 256Kbps*20, 256Kbps*30 and
256Kbps*40 respectively. After the “Update” button is executed, the real
bandwidth will show up in TX fields.
Low Bandwidth
for RX
Example 3: The RX bandwidth number of the port 5~ port 8 is set to 50,
60, 70, 80 respectively, and Speed base is set to “Low”. The real
bandwidth comes from the formula of 32Kbps*50, 32Kbps*60, 32Kbps*70
and 32Kbps*80 respectively. After the “Update” button is executed, the
real bandwidth will show up in RX fields.
High Bandwidth
for RX
Example 4: The RX bandwidth number of the port 5~ port 8 is set to 50,
60, 70, 80 respectively, and Speed b
ase is set to “High”. The real
bandwidth comes from the formula of 256Kbps*50, 256Kbps*60,
256Kbps*70 and 256Kbps*80 respectively. After the “Update” button is
executed, the real bandwidth will show up in RX fields.