Vigitron MaxiiNet Vi30018, Operational Manual

Page: 37 / 122

Page | 37
Auto Logout: If the Idle Time Security is se the Auto Logout
when the non-activity time period is reached the system
will log the user out and return to the log in screen.
NOTE:
If only the Idle Time Security function is selected, Auto
logout will be the default mode for this function.
Back to last display: If this mode is selected the screen will return to the
last selected screen mode when the ldle time period is
reached. A new log in will be required.
Update:
After programming is complete select the Update radio
button to confirm.
9.4 Load Default
If you make a mistake in programming switch features, you can return to
the original default configuration by pressing the load button. All settings
will be reversed with the exception of:

IP address

User Name

Password
NOTE:
In models where the firmware version ends in 1.03, the
switch will default to an IP address of 192.168.1.1.
NOTE:
Whenever the Switch is set back to the Default
settings, the original factory firmware will be installed. If a
Firmware upgrade has been performed prior to the Load Default
operation, the Switch will again need the Firmware upgrade.
After loading default, you may have to restart your browser.