Vigitron MaxiiNet Vi30018, Operational Manual

Page: 46 / 122

Page | 46
10.4 PoE Auto
Check
PoE Auto-Check: This setting will check the status of the IP connection,
reconnect and reapply PoE.
1.
Enter the Interval Time- from 1-240min (1mm- 4 hours). This will
define the duration the connected device is ping.
2.
Enter the Wake up Time- 1-59 seconds. This will define the time it will
take for the connected device will respond and become operational.
3.
Enable Port: Select the port- to which the settings and click update.
4.
Function: Select the port and enter the connected devices IP address.
5.
Click update.
6.
Confirm the settings are correct but viewing the “Enable Status” and
the IP Address.
7.
Make certain the wakeup time is shorter than the check interval
duration.