Vigilant
MX1-Au
Operator Manual
Document: LT0439
Page
23 October 2018
Issue 1.73
5-6
Zone 003 Std Detection G1 |
Shop | PREV
| NEXT
Fault | MENU
Fig 5-9 – Off-Normal Zone
The display shows the zone number and its operating profile on the top
line, the zone text on the second line, and the zone status on the third
and fourth lines. Refer to page 1-15 for details on the zone status
conditions.
Function keys
NEXT
F3
and
PREV
F2
step forwards and backwards
through the list of zones.
The
ALL-PNTS
F3
option in the Recall menu (see Figure 5-2) allows
all configured points to be recalled.
If your panel is connected to a network you will see the following menu:
Fig 5-10 – Recall All Points Network Menu
Press:
LOCAL
F1
to show the selected points on the local
MX1
ALL SIDS
F2
to show the selected points on the network
ENTR SID
F3
to show the selected points on a particular
MX1
panel. This will prompt you to enter the SID of the panel to search.
All configured points will be displayed starting at the lowest numbered
point, irrespective of the point condition. An example is shown in Figure
5.11.
Recall points : ALL
|
LOCAL
|
ALL SIDS
|
ENTR SID
Select SIDs to search |
All Points
ENTER
