29
Entering the password recall procedure
1.
Continuous press
Auto Sync
on the remote or
Auto
on the key pad for 8 times. The projector will
display a coded number on the screen.
2.
Write down the number and turn off your projector.
3.
Seek help from the local service center to decode
the number. You may be required to provide proof
of purchase documentation to verify that you are an
authorized user of the projector.
The "XXX" shown in the above screenshot are numbers
that vary depending on different projector models.
Changing the password
1.
Open the OSD menu and go to the
SYSTEM
>
Security Settings
>
Change
Password
menu.
2.
Press
Enter
. The message
'INPUT CURRENT PASSWORD'
is displayed.
3.
Enter the old password.
•
If the password is correct, another message
'INPUT NEW PASSWORD'
is
displayed.
•
If the password is incorrect, the password error message is displayed lasting for
5 seconds, and the message
'INPUT CURRENT PASSWORD'
is displayed
for your retry. You can press
Exit
to cancel or try another password.
4.
Enter a new password.
5.
Confirm the new password by re-entering the new password.
6.
You have successfully assigned a new password to the projector. Remember to enter
the new password next time the projector is started.
7.
To leave the OSD menu, press
Exit.
The digits being input will be displayed as asterisks on-screen. Do make a note of your
password, and then keep the note in a safe place for later recall.
Disabling the password function
1.
Open the OSD menu and go to the
SYSTEM
>
Security Settings > Power On Lock
menu.
2.
Press
/
to select
Off
.
3.
The message
'INPUT PASSWORD'
is displayed. Enter the current password.
•
If the password is correct, the OSD menu returns to the
Security Settings
page
with
'Off'
shown in the row of
Power On Lock
. You will not have to enter the
password next time you turn on the projector.
•
If the password is incorrect, the password error message is displayed lasting for
5 seconds, and the message
'INPUT PASSWORD'
is displayed for your retry.
You can press
Exit
to cancel or try another password.
Though the password function is disabled, you need to keep the old password in hand should
you ever need to re-activate the password function by entering the old password.
Summary of Contents for LS800HD
Page 101: ......
