31
Adjusting the projected image
Adjusting the projection angle
The projector is equipped with two adjuster foot. It changes the image height and vertical
projection angle. Screw the adjuster foot to fine tune the angle until the image is positioned
where you want it.
If the projector is not placed on a flat surface or the screen and the projector are not
perpendicular to each other, the projected image becomes trapezoidal. To correct this
situation, see
"Correcting keystone" on page 34
for details.
Do not look into the lens while the light source is on. The strong light from the light source
may cause damage to your eyes.
Adjusting the vertical image position
The vertical image height can be adjusted around 14.7% for 1080P and 12% for WUXGA
of offset position. Note that the maximum vertical image height adjustment can be limited
by the horizontal image position. For example it is not possible to achieve the maximum
vertical image position height detailed above if the horizontal image position is at
maximum. Please consult the Shift Range diagram below for further clarification.
Summary of Contents for LS800HD
Page 101: ......
