ViewSonic LS800HD User Manual Download | Manualshive

Page: 8 / 101

background image

3

12. Do not step on the projector or place any objects upon it. Besides probable physical

damage to the projector, doing so may result in accidents and possible injury.

13. Do not place liquids near or on the projector. Liquids spilled into the projector may

cause it to fail. If the projector does become wet, disconnect it from the power
supply's wall socket and call your local service center to have the projector serviced.

14. This product is capable of displaying inverted pictures for ceiling mount installation.

Use only qualified ceiling mount kit for mounting the projector and ensure it is

securely installed.

15. When the projector is under operation, you may sense some heated air and odor from

its ventilation grill. It is a normal phenomenon and not a product defect.

16. Do not use the Security bar for transporting or installation. It should be used with a

commercially available theft prevention cable.

Safety instructions for ceiling mounting of the

projector

We want you to have a pleasant experience using your projector, so we need to bring this

safety matter to your attention to prevent damage to person and property.
If you intend to mount your projector on the ceiling, we strongly recommend that you use a

proper fitting projector ceiling mount kit and that you ensure it is securely and safely

installed.
If you use an inappropriate projector ceiling mount kit, there is a safety risk that the

projector may fall from the ceiling due to an improper attachment through the use of the

wrong gauge or length screws.
You can purchase a projector ceiling mount kit from the place you purchased your projector.

We recommend that you also purchase a separate security cable and attach it securely to

both the anti-theft lock slot on the projector and the base of the ceiling mount bracket. This

will perform the secondary role of restraining the projector should its attachment to the

mounting bracket become loose.

As with any bright light source, do not stare into the beam, RG2

IEC 62471-5:2015.

«
...
6
7
8
9
10
...
»

Summary of Contents for LS800HD






































































































Reviews:

No comments

Related manuals for LS800HD

Brand: Da-Lite Pages: 8

Brand: GEARGO Pages: 60

Brand: Eaton Pages: 12

Brand: Panamax Pages: 24

Brand: Dukane Pages: 2

Brand: Precision Pages: 8

Brand: RS Pages: 4

Brand: Vicom Pages: 37

HIGHlite 4000Dsx

Brand: NEC Pages: 53

isobar HT1210ISOCTR

Brand: Tripp Lite Pages: 4

Brand: Navitar Pages: 24

Brand: Acer Pages: 75

UVONIX BLACKSTAR

Brand: Blizzard Lighting Pages: 16

Brand: Dukane Pages: 44

Brand: Barco Pages: 164

Brand: Ask Proxima Pages: 44

Hopper SV20 Impact

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands