Installation of Navitar NuView Series 372 lens on Christie model LW40U
projector
.
TOOLS REQUIRED: PHILLIPS HEAD SCREWDRIVER
Disassembly:
1. Disconnect unit from power source.
2. Remove four (4) screws from top cover, then remove two (2) screws from the lower
cover Remove cover and set aside for re-installation.
Assembly:
1. Insert keyed portion of the lens adapter into the projector and rotate lens lock lever
downward while squeezing it with stationary handle.
2. Replace the top and bottom covers removed in step 2 of the disassembly procedure
above.
3. To focus, gently twist the front of the lens. To zoom, loosen thumbscrew and twist
the knurled zoom ring and re-tighten the thumbscrew. CAUTION: When focusing,
be sure not to twist lens completely out of the adapter!
