66251750-EN - V1.0 - 05/06/17
62
4000 Series Vandal Resistant Digital GSM - Technical Manual
4000 Series Vandal Resistant Digital GSM Audio Intercom with Proximity
System Operation
ENTERING A DOOR/GATE AND TRADE ACCESS CODE
If an access code is programmed into the
GSM intercom first press the ‘0’ button,
the ‘ENTER A CODE’ screen will appear on
the display, see
Fig.109
. The access code
can be entered using the alpha-numeric
keypad. If an incorrect digit has been
entered press the CLEAR button
(to
delete the most recent digit entered).
Re-enter the correct digit again and so
on until the correct access code has been
entered followed by the ENTER button
, see
Fig.110
. The GSM intercom will
operate the onboard relay to trigger the
door/gate, also see
Fig.107
and
Fig.108
.
Fig. 109
Fig. 110
Entering a Trade Code
If a trade code is programmed into the panel (this will require the use of the Art. 701T
timeclock set in timeclock mode and connected into the TRD terminal) follow the
same steps as if entering a door/gate code. It is important to note that the panel’s
trade facility is
not
related to the timeband feature.
USING THE PROXIMITY READER
If the proximity reader facility is being
used this can be confirmed if the key
symbol
is shown at the top of
the LCD graphical display, see
Fig.111
and
Fig.112
. The user can present the
programmed fob/card in front of this
symbol to operate the door/gate, see
Fig.113
and
Fig.114
.
It should be noted that even if a proximity
fob/card is programmed into the digital
GSM intercom, if the proximity facility is
not enabled then the fob/card will not
operate the door/gate.
Fig. 111
Fig. 112
Fig. 113
Fig. 114
Additional user operations can be carried out via text messaging following user command table 2 on page 63.
RELEASING THE DOOR/GATE BY DIALLING THE DIGITAL GSM INTERCOM (DIAL TO OPEN DTO)
This feature is only possible if the dial to open,
DTO
, feature has been enabled on the digital GSM intercom (refer to notes on page
37). When this feature is enabled the primary number and the 3 divert numbers will be set as dial to open numbers. A call from
any of these stored numbers to the digital GSM will result in the panel dropping the call and then opening the door/gate for the
programmed time.
ENTER A CODE
to confirm
to cancel
ENTER A CODE
to confirm
to cancel
18/11/16
08:35
Enter Number
18/11/16
08:35
Or Search
Enter Number
18/11/16
08:35
Enter Number
18/11/16
08:35
Or Search
Enter Number
