66251750-EN - V1.0 - 05/06/17
31
4000 Series Vandal Resistant Digital GSM - Technical Manual
4000 Series Vandal Resistant Digital GSM Audio Intercom with Proximity
3. GENERAL SETTINGS
MAIN PROGRAMMING MENU
PROG. MENU
VER DG4.0.1
1:
2:
3:
4:
5:
to exit
To exit from the main programming menu
press the CLEAR button
to return to the
default welcome screen.
GENERAL SETTINGS MENU
On the settings screen it is possible to adjust/
set the following:
1.
Aux mode,
2.
Speaker
volume,
3.
Mic volume,
4.
Speech board
volume,
5.
Speech board mode,
6.
Prox bytes,
7.
Prox enable/disable,
8.
Gate mode. Press the
relevant button to change the settings.
1. AUX MODE:1
2. SPK VOL:10
3. MIC VOL:5
4. SB VOL:85
5. SB MODE:3
6. PROX BYTES:2
7. PROX ENABLED:
8. GATE:
to exit
to confirm
to cancel
AUX MODE:
(0-2)
1
to confirm
to cancel
SPK VOL:
(0-14)
10
to confirm
to cancel
MIC VOL:
(0-7)
5
1. AUXILIARY MODE
2. SPEAKER VOLUME
3. MIC VOLUME
The default aux mode will be displayed on
the screen. To change the mode enter the aux
mode required (0 - 2), then press the ENTER
button
to confirm. To cancel and return
to the general settings menu press the CLEAR
button
.
The default speaker volume will be displayed
on the screen. To adjust the volume enter the
level required (0 - 14), then press the ENTER
button
to confirm. To cancel and return
to the general settings menu press the CLEAR
button
.
The default mic volume will be displayed on
the screen. To adjust the volume enter the
level required (0 - 7), then press the ENTER
button
to confirm. To cancel and return
to the general settings menu press the CLEAR
button
.
GENERAL SETTINGS MENU
1. AUX MODE:1
2. SPK VOL:10
3. MIC VOL:5
4. SB VOL:85
5. SB MODE:3
6. PROX BYTES:2
7. PROX ENABLED:
8. GATE:
to exit
If no settings require adjusting then to return
to the main programming menu press the
CLEAR button
.
to confirm
to cancel
SB VOL:
(0-99)
85
to confirm
to cancel
SB MODE:
(1-3)
3
to confirm
to cancel
PROX BYTES:
(2-4)
2
4. SPEECH BOARD VOLUME
5. SPEECH BOARD MODE
6. PROXIMITY BYTES
The default speech board volume will be
displayed on the screen. To adjust the volume
enter the level required (0 - 99), then press the
ENTER button
to confirm. To cancel and
return to the general settings menu press the
CLEAR button
.
The default speech board mode will be displayed
on the screen and is set to mode 3 (combined
speech playback). Select the required mode then
press the ENTER button
to confirm. To cancel
and return to the general settings menu press the
CLEAR button
.
The default prox byte setting will be displayed
on the screen and is set to read for 2 bytes. Select
the prox byte setting required then press the
ENTER button
to confirm. To cancel and
return to the general settings menu press the
CLEAR button
.
Programming Flowcharts
