66251750-EN - V1.0 - 05/06/17
54
4000 Series Vandal Resistant Digital GSM Audio Intercom with Proximity
4000 Series Vandal Resistant Digital GSM - Technical Manual
In addition to this feature the digital GSM also has the facility to monitor the available credit and then text the user to inform them
when the credit has fallen below £5.00, €5.00 or $5.00. It will then remind the user with another text after every 5 calls until the
credit has either increased or if it runs out.
To use this feature, the following settings must first be made:
A Pay As You Go SIM card from a provider that offers this service (Vodafone, O2) must be used.
The correct balance check string must be stored using the
SDL
code (see store balance check dial string).
A mobile phone number that is to receive the ‘balance low’ text must be stored in the master telephone number location using the
STM code (refer to ‘store master telephone number’ feature below).
STORE A MASTER TELEPHONE NUMBER (STM)
The master telephone number is the number which will receive automatic balance updates when the balance gets low (if this
feature is setup). To store a master telephone number the following programming texts can be sent to the digital GSM intercom.
1111STM”yyyyyyyyyyy”
Store the telephone number yyyyyyyyyyy.
1111STM”yyyyyyyyyyy”?
Store the telephone number yyyyyyyyyyy and send a confirmation text back to the
sender.
1111STM?
Query the master telephone number stored. A text message will be sent to the sender with the
stored master telephone number.
1111STM””
Delete the master telephone number stored.
1111STM””?
Delete the master telephone number stored and send a confirmation text back to the
sender.
LATCH THE RELAY (RLA)
It is possible to latch the digital GSM relay closed. This function is particularly useful if the GSM relay is connected to a gate controller
and the user wishes to ‘hold open’ the gate. The following text message can be sent to the digital GSM intercom.
1111RLA
Latch the digital GSM relay to the C/NO position.
1111RLA?
Latch the digital GSM relay to the C/NO position and send a confirmation text back to the
sender.
UNLATCH THE RELAY (RUL)
If the digital GSM intercom relay has been latched it is possible to unlatch the relay with the following text message.
1111RUL
Unlatch the digital GSM relay back to the C/NC position.
1111RUL?
Latch the digital GSM relay to the C/NC position and send a confirmation text back to the
sender.
IMPORTANT NOTE: The digital GSM relay can also be unlatched by pressing 3 on the telephone during a call.
LATCH AUXILIARY OUTPUT AO (A1L)
Auxiliary output AO, like the onboard relay, can be latched. To latch auxiliary output AO the following text message can be sent to
the digital GSM intercom.
1111A1L
Latch auxiliary output AO.
1111A1L?
Latch auxiliary output AO and send a confirmation text back to the sender.
UNLATCH AUXILIARY OUTPUT AO (A1U)
Auxiliary output AO can also be unlatched. To unlatch auxiliary output AO the following text message can be sent to the digital
GSM intercom.
1111A1U
Unlatch auxiliary output AO.
1111A1U?
Unlatch auxiliary output AO and send a confirmation text back to the sender.
Programming via Text Message
