66251750-EN - V1.0 - 05/06/17
42
4000 Series Vandal Resistant Digital GSM - Technical Manual
4000 Series Vandal Resistant Digital GSM Audio Intercom with Proximity
4.2 ADMIN CODE
Selecting option 2 from the code menu will access the admin code screen (refer to
Fig.89
). On this screen the admin code of the GSM panel can be changed. The current
setting will be highlighted on the second line of the screen (see
Fig.89
). By default the
admin code is set to “0000” and can be changed to any 4 digit number, but must be
kept as a 4 digit number. Enter the new code required then to confirm and save the
setting press the ENTER button and the screen will revert back to the general settings
menu (refer to
Fig.78
).
Fig. 89
4.3 TRADE CODE
Selecting option 3 from the code menu will access the trade code screen (refer to
Fig.90
). On this screen the trade code of the GSM panel can be changed. The current
setting will be highlighted on the second line of the screen (see
Fig.90
). By default the
trade code is set to “2222” and can be changed to any 4 digit number, but must be kept
as a 4 digit number. Enter the new code required then to confirm and save the setting
press the ENTER button and the screen will revert back to the general settings menu
(refer to
Fig.78
).
IMPORTANT NOTE: The trade code will only operate when the TRD connection is
shorted to 0V.
Fig. 90
5 TIME SETTINGS MENU
From the time settings menu (refer to
Fig.91
) it is possible to adjust the following
panel settings:
1. Call time
2. Divert time
3. Open time
4. Aux time
5. Timebands
6. LCD time
Fig. 91
After each menu option the current mode or setting for the panel is shown (on initial install the default modes and settings will be
displayed as shown in
Fig.91
). Press the relevant button on the panel to select the menu option that requires adjustment.
5.1 CALL TIME
Selecting option 1 from the time settings menu will access the call time screen (refer
to
Fig.92
). On this screen the call time of the GSM panel can be adjusted. The current
setting will be highlighted on the second line of the screen (see
Fig.92
). The default call
time is set to 40 seconds and can be adjusted from 1 second up to 255 seconds. Enter
the call time required then to confirm and save the setting press the ENTER button and
the screen will revert back to the time settings menu (refer to
Fig.91
).
Fig. 92
5.2 DIVERT TIME
Selecting option 2 from the time settings menu will access the divert time screen (refer
to
Fig.93
). On this screen the divert time of the GSM panel can be adjusted. The current
setting will be highlighted on the second line of the screen (see
Fig.93
). The default
divert time is set to 15 seconds and can be adjusted from 1 second up to 255 seconds.
Enter the divert time required then to confirm and save the setting press the ENTER
button and the screen will revert back to the time settings menu (refer to
Fig.91
).
Fig. 93
to confirm
to cancel
ADMIN CODE
(4 DIGITS)
0000
to confirm
to cancel
TRADE CODE
(4 DIGITS)
2222
to exit
1. CALL TIME:
040
2. DIVERT TIME:
015
3. OPEN TIME:
005
4. AUX TIME:
005
5. TIMEBANDS
6. LCD TIME:
000
to confirm
to cancel
CALL TIME:
(1-255 Sec)
040
to confirm
to cancel
DIVERT TIME:
(1-255 Sec)
015
Programming Screens
