66251750-EN - V1.0 - 05/06/17
20
4000 Series Vandal Resistant Digital GSM - Technical Manual
4000 Series Vandal Resistant Digital GSM Audio Intercom with Proximity
2. The SIM holder is hinged and will open out, see
Fig.23
.
Fig. 23
3. Place the SIM card into the holder (it will only fit one way, see
Fig.24
) and fold the holder back down, see
Fig.25.
Fig. 24
Fig. 25
4. Slide the SIM holder back up until it ‘clicks’, see
Fig.26
.
Fig. 26
5. Once the SIM is in place follow the initialisation process.
POWER UP INITIALISATION SEQUENCE
The digital GSM intercom requires approximately 25 - 30 seconds too initialise properly.
We recommend NOT sending any SMS messages or pressing buttons during this time.
1. First check all the connections have been made correctly and then power up the
system.
2. The graphical display and the keypad buttons will illuminate.
3. After approximately 5 seconds the display will show the Videx GSM logo and
current firmware version number, as shown in
Fig.27
.
4. After a further 10 seconds the GSM will emit a beep and below the Videx logo it
will indicate the digital GSM is registering with the network, as shown in
Fig.28
.
5. After a further delay the display will then show the default welcome screen (refer
to
Fig.100
for the Art.4812 and
Fig.101
for the Art.4812R on page 61).
Fig. 27
Fig. 28
PLEASE WAIT...
VER DG4.0.0
VIDEX
PLEASE WAIT...
REGISTERING...
VIDEX
General Directions for Installation
