Videotec NXPTZ, Instruction Manual

Page: 28 / 414

EN - English - I
nstruc
tion manual
26 MNVCNXPTZT_1710_EN
9 Configuration
The product can be configured using one of the
following tools:
• OSM interface (On Screen Menu): Configuration via
the text on the analogue video signal.
• Software interface: Configuration via the
application installed on PC.
• Web interface: Configuration via the browser.
9.1 OSM interface (On Screen
Menu)
Only for product analogue versions.
9.1.1 Using the OSM
During normal operation of the unit, you can activate
the OSM to select and configure advanced functions.
For further information, refer to the manual of the
keyboard used and to the relative chapter. (11.13
Special controls, page 67).
Exit the OSM with Wide Zoom (Zoom-).
This is a dynamic self-configuration menu
based on the Pan & Tilt model.
9.1.1.1 How to use the joystick
All operations in the menus are carried out using the
joystick.
Left
Up
Right
Down
Fig. 28 Pan & tilt.
Exit Confirm
Fig. 29 Wide Zoom and Tele Zoom.
If you use control keyboards with 2-axes
joystick, use the Wide Zoom and Tele Zoom
buttons to Exit and Confirm.