Videotec MAXIMUS MVX, Instruction Manual

Page: 22 / 256

EN - English - I
nstruc
tion manual
20 MNVCMVXCAM_1645_EN
6.1.7.1 Alarms Menu
From the Alarms menu, users can access the Alarm 1
menu and change the settings.
It allows you to configure the following parameters:
1.
Type: Set the type of contact: normally closed
(N.C.) or normally open (N.O.).
2. Action: The type of action carried out by the
unit when the alarm triggers (Relay, Washer,
Wiper). If Off is selected, the alarm is disabled.
3.
Text:
It is possible to set the wording displayed
when the alarm is enabled.
ALARM 1
------------------------
STATUS : OPEN
1>TYPE : N.O.
2 ACTION: OFF
3 TEXT : ALARM
Fig. 29
The menu dynamically auto-configures based on the
camera installed and the choice made, showing the
parameters on which you can act.
6.1.7.2 Washer Menu
The unit offers the possibility to use a wiper and to
operate a pump to clean the glass.
It allows you to configure the following parameters:
1.
Enable: Enabling the Washer function.
2.
Wiper-On Delay:
Select the time interval
between the activation of the pump and the
activation of the wiper.
3. Washing Duration: Choose the duration of
brushing.
4. Wiper-Off Delay: Select the time interval
between the deactivation of the pump and the
deactivation of the wiper.
WASHER
------------------------
1>ENABLE : N
2 WIPER-ON DELAY : 5
3 WASHING DURATION : 10
4 WIPER-OFF DELAY : 5
Fig. 30