Videotec MAXIMUS MVX, Instruction Manual

Page: 24 / 256

EN - English - I
nstruc
tion manual
22 MNVCMVXCAM_1645_EN
6.1.7.4 Communication menu
It allows you to configure the following parameters:
1.
Serial ACK: Enables or disables the ACK
response for each command sent (if supported
by the serial communication protocol).
2. ACK PelcoD Standard: enables or disables
the standard PelcoD format for the response
messages
3. Device address: Allows users to configure the
device address.
4. RS-485 speed: Allows users to set the serial port
speed.
5. Reboot: Allows users to reboot the device
(appears in the event of setting changes).
COMMUNICATIONS
------------------------
1>SERIAL ACK : N
2 ACK PELCOD STAND: N
3 DEVICE ADDRESS : 255
4 RS485 SPEED :38400
5 REBOOT : S
Fig. 33
6.1.8 Default Menu
1. Delete Setup : Resets all settings to the default
factory status.
4.
Device reboot:
Allows users to reboot the
device.
DEFAULT
------------------------
1>DELETE SETUP? : N
2 DEVICE REBOOT : N
Fig. 34
The above mentioned operations cause the
loss of all previously stored data.
6.1.9 Info Menu
The menu is used to check the configuration of the
device and the installed firmware version.
INFO
------------------------
ADDRESS : 255
PELCOD : Y
MACRO : Y
PANASONIC: Y
RS485 : 38400 8N1
HW : 01
FW : 0.9.3
PC :ABCDEFGHIJKLMN
SN : 122333334444
Fig. 35