Videotec MAXIMUS MVX, Instruction Manual

Page: 23 / 256

Instruc
tion manual - English - EN
21 MNVCMVXCAM_1645_EN
6.1.7.3 Test function menu
A diagnostic menu is available to conduct operational
tests on the device.
It allows you to configure the following parameters:
1.
Enable the Wiper: Allows users to enable the
wiper.
2. Enable Night Mode: Enables night mode
activation in continuous mode (6.1.5.5
Advanced Configurations Menu (Infrared)).
3.
Enable the Relay:
Allows users to enable the
relay.
4.
Device reboot:
Allows users to reboot the
device.
5.
I/O status:
Allows access to the l/O status menu.
TEST FUNCTIONS
------------------------
1>WIPER START : N
2>NIGHT MODE ON : N
3>RELAY ON : Y
4 DEVICE REBOOT : Y
5 I/O STATUS >
Fig. 31
6.1.7.3.1 I/O status menu
This menu displays the status of certain device
components (useful for diagnostic functions).
Input alarm: Displays the alarm status (enabled or
disabled).
Dip In: Displays the status of the control board dip-
switch.
Relay: Displays the relay status (enabled or disabled).
Wiper: Displays the wiper status (enabled or
disabled).
Camera Power Supply: Displays the camera status
(enabled or disabled).
I/O STATUS
------------------------
ENTRY ALARM : 0
DIP IN : 0
RELAY : 0
WIPER : 0
CAMERA POWER : 1
Fig. 32