VE272SFS Roll Grooving Tool
15
6.
Close the hand pump valve by turning
the knob
clockwise
.
7.
Using the hand pump, bring the upper
roll down into firm contact with the pipe/tub-
ing.
8.
Remove the guard-setting pad from its
storage hook beneath the pump support.
Hold the guard-setting pad firmly against the
pipe/tubing, and push it under the roll guards
until it is flush against the red plate.
9.
Loosen the wing nuts, and adjust each
guard to conform to and lightly pinch the
guard-setting pad against the pipe/tubing.
Tighten the wing nuts to secure the guards
into position.
10.
Remove the guard-setting pad. Store the
pad back on the hook provided under the
pump support.
TM-VE272SFS 3776 Rev_B.fm Page 15 Friday, December 3, 2004 12:10 PM
Summary of Contents for VE272SFS
Page 2: ......
