10
VE272SFS Roll Grooving Tool
20.
Depress the safety foot switch, check the
rotation of the chuck and lower roll, and make
sure the tool is stable. If rotation is counter-
clockwise, place the switch on the power
drive to the opposite position. If the tool wob-
bles, make sure the tool is mounted squarely
in the chuck and that the tool is level on the
floor. If the wobble persists, the power drive
support arms are bent or the power drive is
damaged. Have the power drive repaired if
the wobble persists.
21.
Turn the switch on the power drive to the
“OFF” position, or disconnect the power cord
from the electrical source.
22.
If the optional stabilizer assembly was
ordered separately, attach it to the right side
of the tool with the four hex bolts and four lock
washers provided.
22a.
Use the hex bolts provided for installing
the screws.
VE272SFS TOOL SETUP IS NOW
COMPLETE.
TM-VE272SFS 3776 Rev_B.fm Page 10 Friday, December 3, 2004 12:10 PM
Summary of Contents for VE272SFS
Page 2: ......
