VibroSystM DMV-100, Installation Manual

Page: 19 / 52

19 DMV-100 Rotor Creep and Speed Detector - Installation Manual
11. Install the cable clamps and grounding wire.
If the sensor cable is also equipped with a
ground wire, this ground wire will have to be
connected to the ground structure at the
same location as the triaxial extension cable
ground wire.
Use threadlocker (Loctite 242 or equivalent)
to secure the hexagon cap screws
Figure 17 : Securing the cable clamps
(*) Note: Some sensor models
have a ground wire.
(
*
)