Viavi 3900 Series, Programming Manual

Page: 88 / 154

dPMR Signal Rx Meter Remote Commands
4 - 19
4.9 SYMBOL CLOCK ERROR
4.9.1 Symbol Clock Error - Averages
:METERs:SCE:CH1:AVERaging
:METERs:SCE:CH1:AVERaging?
4.9.2 Symbol Clock Error - Average Measurement Reset
:METERs:SCE:CH1:CLEAR:AVG
4.9.3 Symbol Clock Error - Lower Limit Enable
:LIMits:SCE:CH1:LOWer:ENABle
:LIMits:SCE:CH1:LOWer:ENABle?
Description: Set command defines the number of readings taken to calculate Average
Symbol Clock Error measurement.
Query command returns parameter setting.
Range: 1 to 250
Default Value: 1
Set/Query Format: NR1
Example: :METERs:SCE:CH1:AVERaging 100
Sets the number of readings taken to calculate Average Symbol Clock Error
measurement to 100.
Query Response: :METERs:SCE:CH1:AVERaging?
100
Description:
Command clears and resets Average Symbol Clock Error measurement.
Parameter/Query:
none
Description: Set command Enables/Disables Lower Limit for Symbol Clock Error
measurement.
Query command returns parameter setting.
Parameter: OFF | ON | 0 | 1
Default Value: OFF
Set/Query Format: Boolean
Example: :LIMits:SCE:CH1:LOWer:ENABle ON
Enables Lower Limit for Symbol Clock Error measurement.
Query Response:
:LIMits:SCE:CH1:LOWer:ENABle?
1