Viavi 3900 Series, Programming Manual

Page: 82 / 154

dPMR Signal Rx Meter Remote Commands
4 - 13
4.7 INBAND POWER
4.7.1 Inband Power - Averages
:METERs:POWer:CHn:INBand:AVERaging
:METERs:POWer:CHn:INBand:AVERaging?
4.7.2 Inband Power - Average Measurement Reset
:METERs:POWer:CHn:INBand:CLEAR:AVG
4.7.3 Inband Power - Lower Limit Enable
:LIMits:POWer:CHn:INBand:LOWer:ENABle
:LIMits:POWer:CHn:INBand:LOWer:ENABle?
Description: Set command defines number of readings taken to calculate Average Inband
Power measurement.
Query command returns parameter setting.
Range: 1 to 250
Default Value: 1
Set/Query Format: NR1
Example: :METERs:POWer:CH1:INBand:AVERaging 100
Sets the number of readings taken to calculate Channel 1 Inband Power
measurements to 100.
Query Response: :METERs:POWer:CH1:INBand:AVERaging?
100
CHn = 1 or 2 (Channel 1 or 2). Channel 2 is option enabled.
Description:
Command clears and resets Average Inband Power measurement.
Parameter/Query:
none
CHn = 1 or 2 (Channel 1 or 2). Channel 2 is option enabled.
Description: Set command Enables/Disables Lower Limit for Inband Power measurement.
Query command returns parameter setting.
Parameter:
OFF | ON | 0 | 1
Default Value:
OFF
Set/Query Format:
Boolean
Example:
:LIMits:POWer:CH1:INBand:LOWer:ENABle ON
Enables Lower Limit for Channel 1 Inband Power measurement.
Query Response: :LIMits:POWer:CH1:INBand:LOWer:ENABle?
1
CHn = 1 or 2 (Channel 1 or 2). Channel 2 is option enabled.
N O T E
N O T E
N O T E