11
In case the assembled body boiler with boiler pedestral can not be placed into the boiler room there is
necessary to proceed by the following method (see Fig. no. 6):
•
Disassemble arch welder including sealing by unbolting the nuts M10 and washers.
•
Unbolt nuts M8 with washers, that connect the boiler body with the boiler pedestral together. At
15 kW boiler unbolt boiler body by the help of screw M6 x 16 and washers from distance plate.
•
Take off boiler body (shell).
•
Clean boiler body and boiler pedestral from old boiler binding material.
•
This way ready pedestral place in the boiler room.
•
Apply binding material on the boiler pedestral and placet the boiler body. Tightness of the pedestral
with boiler body is very important.
•
Than screw up the arch welder including sealing.
•
Screw up the boiler body to the pedestral by the help of nuts M8 and at 15 kW boiler vision screw up
the boiler body to the distance plate by the help of the screws M6 x 16.
1 – Pedestal with a burner
2 – Boiler shell with a smoke adapter
3 – Washer 8,4
4 – Nut M8
5 – Sealing 60x48x2
6 – Arch welder
7 – Washer 10,5
8 – Nut M10
9 – Check plate
10 – Screw M8x16
11 – Washer 6,4
12 – Screw M6x16
Fig. No. 6 Boiler pedestal and boiler body disassembly
