53
6.3.1 Parameters setting and displaying
Parameters setting
If you want to change parameters take following steps:
•
Press simultaneously the keys OK, ESC and – minus – blank display will appear.
•
Press 2x key – minus and n0 appears on the display.
•
Press 2x key + plus and n3 appears on the display.
•
Confirm with key OK.
•
P appears on the display and after approx. 2 sec. the digit 1 is displayed.
•
By the key OK the parameter value is displayed.
•
By the key + plus or – minus the displayed value can be changed.
•
By the key OK confirm the changed value.
•
By the key ESC leave the parameter without any change
•
Select the next parameter by the key + plus or – minus and repeat the whole procedure.
Attention!
After the completion of making changes in parameters always check whether QAA 88 device is
switched on (cursor is above the Auto symbol).
Parameters displaying
If you only want to display the set parameters without the possibility to make any change take following steps:
•
Press simultaneously the keys OK, ESC a – minus – blank display will appear.
•
Press 2x key – minus and n0 appears on the display.
•
Press 1x key + plus and n2 appears on the display.
•
Confirm with OK key.
•
d1 appears on the display and after approx. 2 sec. the digit 1 is displayed
•
By the key OK the parameter value is displayed
•
By the key OK or ESC leave the parameter without any change
•
Select the next parameter by the key + plus or – minus and repeat the whole procedure.
If during setting, changing or viewing the parameters the key is not pressed for 3 minutes the QAA 88 device
will return to the introductory display.
