Page 31 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
Enter
1
in the
Time schedule
menu and the following menu choice is offered:
LED display:
1. off
2. on
Your choice 1...2?
6.3.2.2 Time schedule – Operation weekdays
In the submenu
Operation weekdays
the days are chosen, at which measurements shall be done
and depending to other settings of the parameter set the speed shall be shown on the numeric
LED speed display or other actions defined in the
Extensions thresholds
shall be made
.
The menu
Time schedule
(chapter 6.3.2) lists the current operation weekdays, e. g.
Su, Mo,
Tu, We, Th, Fr, Sa
of the parameter set.
After selecting
2
in the menu
Time schedule
you are asked to select the day you want to
change in the submenu
Weekday
:
Weekday:
1. Sunday
2. Monday
3. Tuesday
4. Wednesday
5. Thursday
6. Friday
7. Saturday
Your choice 1...7? _
The chosen day of the week is added to the list of operation days in the
Time schedule
menu,
if it was not listed before, respectively removed from the list, if it was listed.
6.3.2.3 Time schedule – Daily start and daily stop time
The daily start and stop time determine the daily time of the measurement and display opera-
tion at the chosen operation weekdays (chapter 6.3.2.2).
If the
Daily start time
and the
Daily stop time
is set to the same time values, these times are
ignored by the system and the task is performed at the whole selected operation weekdays.
You have to insert the time values in the format hh:mm. Valid are time values between 00:00
and 23:59.
Examples:
1. You intend to measure in front of a school only during school visiting times. Only at
schooldays from Monday till Friday, in the time from 07:30 till 13:30 the viasis shall measure
and display the vehicle driver’s speed.
Following settings must be made in parameter set 1 in the time schedule menu:
- Set LED display to „on“.
- Change the operation weekdays to „Mo,Tu,We,Th,Fr“.
- Set the daily start time to „07:30“ and the daily stop time to „13:30“